V-GPS-TX
GPS Master Clock, Wireless
V-GPS/V-GPS-TX
Master clocks allows connection to Valcom Intercom Systems
- GPS nput
- Interfaces directly with Valcom Analog & Digital Clock Systems
- Up to 10 server addresses can be pre-programmed into the unit for continuous, accurate synchronization
(with web interface software upgrade) - Extremely intuitive GUI that allows user to configure all of the settings of the master clock through a simple web interface
- Automatic bi-annual daylight savings time changes (when used as a primary master clock)
- Ten year battery backup for timekeeping
Overview
The Valcom GPS Master Clock receives accurate time updates via GPS satellites. It is available for either wired (V-GPS) or wireless (V-GPS-TX) clocks allowing you to choose the best option for your facility. With the GPS Master Clock, there is no need for a Network Time Protocol (NTP) source.
Specifications
VOLTAGE INPUT
85-265 Vac
50/60 Hz
OUTPUTS
RS485 and 2 clock circuits
INPUTS
SNTP, Wireless repeater, RS485, 58-minute correction to 59-minute correction, National Time and Rauland and Dukane digital
OPTIONAL OUTPUTS
Valcom Wireless Communication
INPUT SENSITIVITY
-103dBm
RF SIGNAL OUTPUT
30 dBM (1 Watt)
TRANSMITTER
V-GPS-TX only
TRANSMISSION FREQUENCY
915-928 MHz frequency hopping technology
ANTENNA
Thread mount bullet on 3/4" conduit
ANTENNA DIMENSIONS
Diameter: 3.04"
Height: 2.94"
75 feet of RG58 included
Optional: up to 150 feet of RG59 may be utilized
DISPLAY
.56" LED display
TIME BASE
Crystal
CALENDAR
Built-in calendar with leap year
STANDYBY TIME KEEPING
Ten (10) years
ENVIRONMENT
Temperature: 32 to 130°F (0 to 45°C)
HOUSING & FINISH
Smooth surface metal case; color, black
DIMENSIONS & WEIGHT
Dimensions: 11.00in L x 17.50in W x 1.75in D
27.94cm x 44.45cm x 4.45cm)
Weight: 6.50lbs (2.90kg)
MOUNTING
Surface Mount - V-GPSA-TX
APPROVALS
UL, cUL
FCC approved part 15 section 15.247
UL 863 CSA C22.2 UL Cert. 20140123-E19248