VIP-130AL

IP High-Efficiency Horn with Long Line Extender, One-Way

Concurrent SIP & multicast
Power over Ethernet (PoE) IEEE 802.3af
Paging, emergency alerts and tones
One-way paging
Valcom, InformaCast^® & Intrado Revolution^® versions

Horn is indoor/outdoor
- Network interface is mounted indoor
Available in Beige and Gray
High quality audio
Quick & easy installation

Overview

The VIP-130AL PoE SIP High-Efficiency Horn is the perfect choice for high-quality voice paging, emergency alerts and loud ringing for large indoor and outdoor areas. Includes a mount for quick and easy installation on multiple surfaces (beams, walls, electrical boxes, etc).

A built-in IP extender allows the horn to be conventionally installed up to 1,000 feet from the network. Software compatibility includes Valcom, InformaCast^®, and Intrado Revolution^®. The VIP-130AL is a fully compliant 3rd party SIP device and can be utilized with hosted, cloud and premise-based telephone systems.

Specifications

AUDIO OUTPUT

116 dB measured at 4ft (1.22 m) on axis with a -10dBm
input at 1 kHz

FREQUENCY RESPONSE

225 Hz to 14 kHz

DISPERSION

120° Horizontal and 90° Vertical

POWER REQUIREMENTS

Via 802.3af PoE Ethernet Switch: Class 3

NETWORK

10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP

PROTOCOLS

IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)

AUDIO CODECS

G.711 u-law, others

ACCESS METHODS

PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP telephone system

ENVIRONMENT

Network Interface: Indoor Only
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
PSE: (Power Sourcing Equipment) to be compliant to IEEE 802.3af
Horn:
Temperature: -20 to +55° C
Humidity: 0 to 95% non-condensing

HOUSING & FINISH

Made with polycarbonate plastic

DIMENSIONS & WEIGHT

Dimensions:
Horn: 7.38in H x 10.00in W x 10.40in D
(18.75cm x 25.40cm x 26.42cm)
Weight: 5.60 lbs (2.54 kg)
Network Interface: 1.62in H x 5.63in W x 3.45in D
(4.11cm x 14.30cm x 8.73cm)
with brackets – 8.22in W (20.87cm)
Weight:
2.10lbs (0.95kg)

MOUNTING

The VIP-130AL Horn is designed for most FD
electrical box or wall mounting and must be within
350 feet of the VIP-130AL Network Interface.

Options

Protocol	Beige	Gray
Valcom	VIP-130AL-BGE	VIP-130AL-GY
InformaCast^®	VIP-130AL-BGE-IC	VIP-130AL-GY-IC
Intrado Revolution^®	VIP-130AL-BGE-SA	VIP-130AL-GY-SA