VIP-176A
SIP Intercom Doorplate Speaker, Vandal-Resistant, with LED, Stainless Steel, Talkback
Great sounding vandal-resistant SIP talkback speaker for moderate to high noise indoor areas.
- Concurrent SIP and Multicast
- PoE (IEEE 802.3af)
- Paging, emergency alerts, and tones
- Valcom and InformaCast™ versions
- Moderate to high noise areas
- Indoor/outdoor
- High quality audio
- Quick and easy installation
- Talkback intercom
- Vandal-resistant
Overview
The VIP-176A, PoE SIP Vandal-Resistant, with LED, Intercom Doorplate Speaker, is the perfect choice for high quality voice paging, two-way communication and emergency alerts for moderate to high noise areas. Designed for quick and easy installation.
Specifications
SPEAKER ELEMENT
Voice coil impedance: 45 Ohms
CALL SWITCH
Single pole momentary contact
AUDIO OUTPUT
Rating: > 96 dB @ 4ft (1.22 m)
POWER REQUIREMENTS
Power over Ethernet (POE) 802.3af compatible
NETWORK
10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP
PROTOCOLS
IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)
AUDIO CODECS
G.711 u-law, others
ACCESS METHODS
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
Valcom M Cast Page Group
SIP – enabled telephone system
ENVIRONMENT
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
Suitable for indoor or outdoor, protected from direct precipitation.
HOUSING & FINISH
Durable brushed stainless door plate speaker with call button.
DIMENSIONS & WEIGHT
Dimensions:
4.88in H x 4.88in W x 2.50in D (including button)
(12.40cm x 12.40cm x 6.40cm)
Weight: 0.82lbs (0.37kg)
MOUNTING
The VIP-176A Doorplate is designed for double gang FD electrical box mounting and must be within 350 feet of the Network Interface.
ACCESSORIES
VM-SRLY
Options
| Protocol | Part Number |
| Valcom | VIP-176A |
| InformaCast® | VIP-176A-IC |
Resources
Installation Manuals
Marketing Sheet
Technical Specifications
Simple Diagram
