VIP-431A-DS

IP Digital Clock/Speaker, 4-Digits, Angled Surface Mount, One-Way or Talkback Programmable

VIP-431A-DS IP Digital Clock/Speaker, 4-Digits, Angled Surface Mount, One-Way/Talkback Programmable, Gray

PoE (802.3af) - no local power required
Only one Ethernet port connection required

Output Level 103 db/1Meter
Line output supports Valcom amplified speakers

Overview

Valcom's VIP-431A-DS IP 4-Digit Digital Clock/Speaker is a gray metal wall speaker with a clock. The speaker can be either one-way or talkback and provides voice access and a visual time line to a single zone over an IP-based network. The speaker level is adjusted via software during setup. The clock synchronization is initiated via connection to any Network Time Protocol. The VIP-431A-DS is an ideal and effective solution for any environment such as offices, meeting rooms, gymnasiums, warehouses and hallways.

Specifications

SPEAKER ELEMENT

Cone diameter: 8-inch (20.32 cm)
Voice coil impedance: 45 Ohms

MAGNET

Cone type with 5oz (142g) ceramic magnet

AUDIO OUTPUT

Rating: > 96 dB @ 4ft (1.22 m)
Signal/noise ratio: -70
The -10dBm line level out may be connected to up to 40 Valcom Self Amplified Speakers

FREQUENCY RESPONSE

80 Hz to 15 kHz

POWER REQUIREMENTS

Power over Ethernet (POE) 802.3af compatible

NETWORK

10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP

PROTOCOLS

IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)

AUDIO CODECS

G.711 u-law, others

ACCESS METHODS

PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP – enabled telephone system

ENVIRONMENT

Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating

DIMENSIONS & WEIGHT

Dimensions:
14.90in H x 12.40in W x 4.80in D1 (top, with grille)
1.40in D2 (bottom)
(37.80cm x 31.50cm x 12.20cm (D1)
3.60cm( D2)
Weight: 4.25lbs (1.90kg)