Primary Category: Paging Gateways

IP Gateway FXO Port, Network — Quad Port, VIP-824A

VIP-824A IP Paging Gateway

The VIP-824A IP Paging Gateway FXO Port, Network — Quad Port allows most loop start station ports to be connected to a managed IP-based LAN/WAN. SIP connectivity allows the VIP-824A to act as a gateway device between a SIP telephone system and other Valcom paging systems.

  • RJ-45 for network connection
  • 4 RJ-11 FXO connections
  • 4 RJ-11 failover telephone connections
  • Power over Ethernet (PoE) 802.3af compatible
  • Decode Caller ID signals
  • Front panel activity LED
  • 5mm jack for DC power
  • Network activity LEDs

IP Network Input/Output Module, InformaCast®, VIP-848AR-IC

With Valcom’s VIP-848AR-IC, you can easily control and monitor virtually any type 3rd party system and device with the 8 input, 8 output contact controller. Multiple devices can easily be connected and controlled via schedules or during emergencies including, but not limited to the following:

  • Panic buttons
  • Door/gate control
  • Turn on/off lights
  • Trigger cameras
  • Initiate messages
  • Gunshots detectors
  • Disable elevators
  • Turn off heating/air

SIP 20-Watt Gateway, 25 V, VIP-851-25

VIP-851-25 IP/SIP Paging Gateway

Valcom’s VIP-851-25, SIP 20-Watt Gateway 25 V enables voice access to a single zone of one-way paging over an IP network, allowing page zones to be extended anywhere network connectivity is available. The VIP-851-25 can be programmed as a SIP (Session Initiation Protocol) device for connectivity to virtually any VoIP (Voice over IP) telephone system. The VIP-851-25 has output connections for line level and 25 V speakers only.

  • 1 Audio Input
  • 2 Audio Outputs (VIP-851-25)
  • 1 Form C Relay
  • 1 SIP identity for registering to a VoIP telephone system
  • Power over Ethernet PoE+ 802.3at compatible
  • Front panel activity LED
  • Front panel PoE+ Fault indicator
  • Front panel Supervision Fault indicator
  • Provides 20-Watts of power for 25 V speakers
  • Provides line level audio for up to 40 Valcom one-way amplified speaker assemblies
  • Contact closure or VOX operation of audio input
  • Removable screw terminal connectors provided for audio and relay interfaces
  • AUX input music mutes during page
  • Barrel jack for optional DC power

SIP 20-Watt Gateway 25/70/100 V, VIP-851-70/100

Valcom’s VIP-851-70/100, SIP 20-Watt Gateway 25/70/100 V enables voice access to a single zone of one-way paging over an IP network, allowing page zones to be extended anywhere network connectivity is available. The VIP-851-70/100 has output connections for line level and 25 V, 70 V or 100 V speakers.

  • 1 Audio Input
  • 3 Audio Outputs (VIP-851-25/70/110)
  • 1 Form C Relay
  • 1 SIP identity for registering to a VoIP telephone system
  • Power over Ethernet PoE+ 802.3at compatible
  • Front panel activity LED
  • Front panel PoE+ Fault indicator
  • Front panel Supervision Fault indicator
  • Provides 20 Watts of power for 25 V or 70 V or 100 V speakers
  • Provides line level audio for up to 40 Valcom one-way amplified speaker assemblies
  • Contact closure or VOX operation of audio input
  • Removable screw terminal connectors provided for audio and relay interfaces
  • AUX input music mutes during page
  • Barrel jack for optional DC power

IP Gateway Audio Port, Network — Dual Port, VIP-802B

Valcom’s VIP-802B IP Gateway Audio Port, Network — Dual Port enables voice access to two zones of one-way paging over an IP-based network. This allows page zone extension anywhere on the network allowing the page zone to be extended anywhere network connectivity is available. It can also be programmed as a SIP device with two identities (one per audio channel) for connectivity to virtually any VoIP telephone system.

  • Audio outputs
  • Programmable Form A or C relay closures
  • Programmable contact closure Inputs
  • RJ-45 jack for network connection
  • Front panel activity LED
  • Barrel jack for optional DC power
  • Provides audio for up to 40 Valcom one-way self-amplified speaker assemblies
  • Output control contact closure provided during paging output
  • UL and cUL listed
  • Compatible with 25 or 70 Volt amplifiers

IP Gateway Audio Port, Network — Quad Port, VIP-804B

VIP-804B IP Paging Gateway

The VIP-804B is one of Valcom’s IP Gateway Audio Port, Network — Quad Port enables voice access to four zones of one-way paging over an IP-based network. This allows page zone extension anywhere on the network allowing the page zone to be extended anywhere network connectivity is available. It can also be programmed as a SIP device with four identities (one per audio channel) for connectivity to virtually any VoIP telephone system.

  • Audio outputs
  • Programmable Form A or C Relay closures
  • Programmable contact closure Inputs
  • RJ-45 jack for network connection
  • Front panel activity LED
  • Provides audio for up to 40 Valcom one-way self-amplified speaker assemblies
  • Output control contact closure provided during paging output
  • Compatible with 25 or 70 Volt amplifiers
  • UL and cUL listed
  • Barrel jack for optional DC power

IP Gateway FXS Port, Network — Single Port, VIP-811A

Valcom’s IP Gateway FXS Port, Network — Single Port enables telephones to engage in paging and phone-to-phone communications over an IP-based network.

  • Concurrent SIP and Multicast
  • PoE (IEEE 802.3 af)
  • Windows based application for control and setup
  • Ideal for remote areas where phones are required
  • 1 RJ-11 telephone connections
  • 2 Relays with Form C contacts

IP Gateway FXS Port, Network — Dual Port, VIP-812B

Valcom’s VIP-812B IP Gateway FXS Port, Network — Dual Port enables telephones to engage in paging and phone-to-phone communications over an IP-based network.

  • RJ-45 for network connection
  • 2 RJ-11 telephone connections
  • 4 Relays with Form C contacts
  • Front panel activity LED
  • Network activity LEDs
  • Ringer equivalency (REN)=0.8A
  • 2.5mm jack for external power (optional)
  • UL and cUL listed
  • Power over Ethernet (PoE) 802.3af compatible

IP Gateway FXS Port, Network — Quad Port, VIP-814B

Valcom’s VIP-814B IP Gateway FXS Port, Network — Quad Port enables telephones to engage in paging and phone-to-phone communications over an IP-based network.

  • RJ-45 for network connection
  • 4 RJ-11 telephone connections
  • 4 Relays with Form C contacts
  • Front panel activity LED
  • Network activity LED
  • Ringer equivalency (REN)=0.8A
  • 2.5mm jack for external power (optional)
  • UL and cUL listed
  • Power over Ethernet (PoE) 802.3af compatible

IP Gateway FXO Port, Network — Single Port, VIP-821A

VIP-821A IP Paging Gateway

The VIP-821A IP Gateway FXO Port, Network — Single Port allows most loop start station ports to be connected to a managed IP-based LAN/WAN. SIP connectivity allows the VIP-821A to act as a gateway device between a SIP telephone system and other Valcom paging systems.

  • RJ-45 for network connection
  • 1 RJ-11 FX0
  • 1 RJ-11 telephone failover connection
  • Front panel activity LED
  • Network activity LEDs
  • 2.5mm jack for DC
  • 802.3af compliant