Primary Category: Accessories

120-Watt Wall Mount Amplifier, SM120

The SM120 Amplifier provides up to 120-Watts of audio power for voice paging or background music systems.

  • Active mix or Priority override on inputs (override is voice operated)
  • Wall or shelf mount
  • Mic 1/Tel on Input 1, plus 3 standard MIC/AUX inputs
  • Volume control for each input
  • Master volume, bass, and treble controls
  • Overload limiting circuit protection
  • Screw terminals for all connections
  • Power “ON” indicator
  • Clipping and Fault indicators
  • 8 Ohm, 25 and 70 Volt selectable output
  • Tone generator (warble and single tone)
  • Optional external volume control

Remote Volume Control, SM-VC

Clarity SM-VC Remote Volume Control

The SM-VC Remote Volume Control allows adjusting the output level of the Clarity SM120 amplifier from a remote location.

  • Remotely controls output level of a Clarity SM120 Amplifier up to 1000ft away
  • Brushed stainless steel plate
  • Embossed markings from 0 to 10
  • Wall mountable

Impedance Matching Transformer, VMT-1

Valcom’s Input/Line Transformer is designed to match inputs from or outputs to a 600-ohm line. Used as an input-matching transformer, it connects telephone systems to most public address amplifiers that are used for telephone paging.

  • Connects system to most public address amps for phone paging
  • Functions as output-matching transformer to feed program material over a 600-ohm telephone line for “music-on-hold”
  • Compatible with any 25V output connection amplifier
  • Hi-Z, 10k-ohm primary impedance
  • Lo-Z, 600-ohm secondary impedance, balanced with center tap
  • Matches high-to-low impedance or low-to-high impedance
  • Adapts line level signals to microphone inputs

Audio Isolation Transformer, VMT-2

Valcom’s Audio Isolation Transformer may be used for magnetically coupling line level audio. Common uses include isolating ground references from one audio circuit to another.

  • Magnetically Coupling Line Level Audio
  • Isolating Ground References From One Audio Circuit to Another

8-Inch Cone Speaker Assembly, 24 Volt, VSA-1020C

VSA-1020C Cone Speaker Assembly

The VSA-1020C, 8-Inch Cone Speaker Assembly, 24 Volt is the perfect choice for high quality voice paging, communication and emergency alerts for indoor areas. It can be mounted in a variety of faceplates and backboxes to meet your needs.

  • Paging, emergency alerts and tones
  • One-way paging
  • High -uality audio
  • Indoor use only

Mounting Bridge for 8-Inch Ceiling Speaker, Metal, 5 Pack, S-550-5

S-550-5 Ceiling Speaker Bridge provides a solid mounting structure for ceiling speakers, prevents ceiling tile sag and is galvanized to inhibit rusting. Packaged 5 per box.

  • Provides a solid mounting structure
  • Prevents ceiling tile sag
  • Coated to inhibit rust
  • Compatible with round or square baffles
  • Packaged 5 per box

Surface Backbox for Square Speaker Faceplates, VB-S11

VB-S11 Surface Backbox

Valcom backboxes are available in a variety of shapes and sizes to meet any installation style or design. The surface backbox is designed to facilitate easy mounting for Valcom’s Square Speaker Assembly. The Surface Mount Backbox is preferred when installing on a harder surface such as concrete or cinder block.

  • Backbox for square speaker assembly
  • Surface mount
  • Indoor use

Surface Backbox for Large Clock/Speakers, VB-S20

Valcom backboxes are available in a variety of shapes and sizes to meet any installation style or design. The VB-S20 Surface Mount backbox is designed to facilitate easy mounting of Valcom’s large clock/speaker assembly. The surface mount backbox is preferred when installing on a harder surface such as concrete or cinder block

  • For large clock/speaker assembly
  • Surface mount
  • Indoor use

Wire Guard for 12 and 16-Inch Analog Clocks, V-WGACLK

With the purpose of protecting the clocks within your system, Valcom’s Wire Guards are designed for use with 12-inch and 16-inch round analog clocks. Each Wire Guard is fabricated from 3 gauge steel rods, which are welded together and have a zinc-plated, lacquered-baked clear coat finish.

These heavy-duty Wire Guards come complete with fixed tabs welded to the rods for mounting directly to the wall. They are hung completely independent of the clock in order to provide maximum protection.

  • Provides maximum protection for analog clocks
  • Wire frame: heavy 3-gauge steel rods, welded together
  • Zinc-plated, lacquered-baked clear coat finish
  • Convenient mounting tabs

Surface Backbox for Small Clock/Speakers, VB-S23

Valcom backboxes are available in a variety of shapes and sizes to meet any installation style or design. The Surface Mount Backbox is preferred when installing on a harder surface such as concrete or cinder block.

  • Backbox for small clock/speaker assembly
  • Surface mount
  • Indoor use