Primary Category: Accessories

In-Wall Audio Mixer Remote Module, V-9984-W

Valcom’s V-9984-W, In-Wall Audio Mixer Remote Module, is a cost-effective solution that eliminates the use of expensive in-wall amplifiers. The complete sound system is ideal for conference rooms, lecture halls, restaurants, auditoriums and gymnasiums.

  • Provides 1 balanced XLR microphone input & 1 auxiliary input for MP3 Players, CD, DVD or PC’s
  • Connects to main control module, w/2 Pair 24 AWG Cable
  • Volume control for each input
  • Power “ON” indicator
  • Phantom power (Switch Controlled) with “ON” indicator allows use of consumer microphone

Four Channel In-Wall Audio Mixer with Remote, V-9985-W

Valcom’s V-9985-W Four Channel In-Wall Mixer is a cost-effective solution that eliminates the use of expensive in-wall amplifiers. The complete sound system is ideal for conference rooms, lecture halls, restaurants, auditoriums and gymnasiums.

  • Built-in compressor (Option Switch Controlled) for automatic consistent volume level adjustment even when voices vary – low to high
  • Master volume control for optimum volume adjustments & volume control for each input
  • One general building page input (-10dBM) overrides all other inputs
  • Drives 50 amplified speakers and/or horns
  • 8 Segment LED meter for visual indication of Audio Signal Levels
  • Full frequency range output for speakers
  • Hi Pass output for horns

Message-On-Hold USB, V-9988

Valcom’s V-9988 Message-On-Hold USB device eliminates time limitations and provides an infinite opportunity for continuous background music or messages. The digital message on hold systems supports the MP3 playback without any special drivers or software.

  • Continuous playback of music and/or messages
  • Supports flash drives up to 4GB
  • High quality audio playback up to 128Kbps
  • Built-in monitor speaker
  • LED status indicator
  • USB flash drive include
  • Free generic on-hold message
  • Free personalized on-hold message
  • Pre-recorded audio file included

USB Digital Multi-Messager Device, V-9989

Valcom’s V-9989 USB Digital Multi-Messager Device repeater stores up to 99 different messages in an MP3 format on an industry standard USB flash drive. The messages can be assigned as continuous play, timed play with a built-in timer circuit, or triggered on the eight inputs that unit provides.

  • Store up to 99 messages
  • Triggered and/or timed playback
  • Plays MP3 files from USB flash drive
  • Up to 4GB flash drives supported
  • No drivers or special software needed
  • Auxiliary 12Vdc output for wiring sensors
  • Playback quality up to 128Kbps
  • Active output indication trigger
  • Built-in monitor speaker

Noise Sensing Volume Control, V-9933A

When Valcom’s V-9933A Noise Sensing Volume Control is installed in your organization, the device electronically adjusts the level of your speakers to ensure pages are clear and intelligible. The V-9933A is ideal in any setting where ambient noise levels are constantly changing. When paired with the V-9934 Remote Microphone, your environments sound level is being constantly monitored.

  • Constantly monitors the area and automatically adjusts the volume on the paging speakers
  • Use one per zone and/or one per noise area

Remote Microphone, V-9934

Valcom’s V-9934 is a Remote Microphone designed to measure noise level changes in production plants. It works with the V-9933A Noise Sensing Volume Control to adjust page volume based on machine noise levels, ensuring comfortable announcements for everyone.

  • Self-contained microphone and pre-amp Phantom Powered – no power supply required
  • Screw terminals provided for all connections
  • Up to four units may be paralleled on one V-9933A

C.O. Audible Ring Unit, 6 Lines, V-9936A

Valcom’s Tone Generators allow you to add distinctive tones or rings over your speakers. The Valcom Tone Generator gives you the ability to alert your employees of scheduled breaks and emergencies.

  • 90 VAC ring or dry contact closure activation
  • Ringing over paging speakers
  • Contact closure to activate loud bells
  • Automatically overrides page or music
  • Connects directly to C.O. Line or PBX Station Lines
  • Built-in warble tone generator

Microphone Adapter, V-9939C

Valcom’s V-9939C Microphone Adapter connects Valcom’s dynamic microphones to our paging systems. The V-9939C works with most microphones with push-to-talk switches.

  • Provides contact closure
  • Built-in microphone preamplifier
  • Mounts at microphone location
  • Provides a set of form “C” contacts
  • May be connected to a selected zone of a multi-zone paging system
  • Connector terminals for all connections
  • 600 Ohms balanced and 50,000 Ohms inputs works with most microphones with push-to-talk switches

Loud Warbler Ringer Horn, V-9945A

Valcom’s V-9945A Loud Warble Ringer Horn is a two-tone horn designed to broadcast tones throughout your organization to notification individuals of shift changes, breaks or other important announcements. The V-9945A broadcasts a loud warble as long as an input signal is present and have the ability for night rings for after normal business hours. The V-9945A is a two-tone ringer horn that provides amplified electronic tones for signaling in large, noisy or outside areas.

  • Interrupted or uninterrupted contact closure activation
  • Built-in tone generator, speaker and volume control
  • Warble tone – night ring
  • Single tone – time clock/doorbell/alarm
  • Single tone overrides warble tone if activate simultaneously
  • Beige
  • Indoor/outdoor use

Auxiliary Relay Unit, V-9955

Valcom’s Auxiliary Relay Unit is used for strobe activation, door and camera controls.

The Auxiliary Relay Unit is used in conjunction with Valcom’s V-998 Strobe. Valcom’s Strobes allow you to provide a visual notification to individuals within your organization. Our Strobe lights provide suitable signaling for evacuations, construction zone notices and other alerts that aid in guiding and protecting individuals.

  • Three 24 Vdc 2 pole relays with 1 Amp contacts
  • Screw terminals for all connections
  • Independent control or simultaneous operation of relays
  • Power requirements:
  • –21.5 to –26 VDC battery, 20 mA per relay
  • Provides relay for Strobes.