Primary Category: Paging Gateways

ezIP 3 Zone Hybrid Page Controller, EZ-PC3

*Compatible with Valcom VIP devices when upgraded*

The ezIP 3 Zone Hybrid Page Controller is the ideal page controller for integrating legacy systems while being future proof to function with a Voice over IP phone system. This unit is designed for quick and easy installation.

The page controller provides:

  • Provides paging from various phone system connections (FXS, PABX station extension or loop start trunk port, Standard telephone, and SIP (Session Initiation Protocol).
  • Wideband HD voice for higher intelligible speech
  • Simultaneously multicast to IP endpoints and provide line-level output to analog endpoints
  • Support for Valcom 45 OHM, 25 Volt, or Valcom Self-Amplified Speakers
  • Background Music Input
  • Override Audio & Controls
  • Flexible Mounting Options (Rack-Mount or Wall-Mount)
  • Access to one dry contact closure input (expandable up to 6 with license upgrade)
  • Expandable Zone Capabilities via the network(multiple units maybe joined together for 12 or 18 zones)
  • Secure SIP
  • Scheduler for tone output on a timed basis

ezIP Gateway Audio Port, Network — Single Port, Rack Mount, EZ-GW1R

*Compatible with Valcom VIP devices when upgraded*

The EZ-GW1R is one of Valcom’s ezIP Audio Port Gateways that enables voice access to a single zone of one-way paging over an IP-based network. This allows page zone extension anywhere on the network allowing the page zone to be extended anywhere network connectivity is available. It can also be programmed as a SIP device for connectivity to virtually any VoIP telephone system.

  • Audio outputs
  • Programmable Form C Relay Closures
  • Programmable contact closure input
  • RJ-45 jack for network connection
  • Front panel activity LED
  • Compatible with 25 or 70 Volt amplifiers
  • Provides audio for up to 40 Valcom one-way self-amplified speaker assemblies
  • Output control contact closure provided during paging output
  • Barrel jack for optional DC power

Dual Enhanced Network Station, Dual FXS Port, Rack Mount, VE8012BR

The VE8012BR Dual Enhanced Network Station Port allows most loop start terminal devices to be connected to a managed IP-based LAN/WAN.


• RJ-45 for network connection
• 2 RJ-11 telephone connections
• 4 relays with Form C contacts
• Front panel activity LED
• Network activity LEDs
• 2 REN
• 2.5mm jack for DC
• Power over Ethernet (PoE) 802.3af compliant
• Provides caller ID information
• No server required
• 1-To-11-digit dial plans
• Easy windows-based setup
• Contact closures available for:
-audio indication
-ringing indication
-door unlocking

Quad Enhanced Network Station, Quad FXS Port, VE8014B

The VE8014B Quad Enhanced Network Station Port allows most loop start terminal devices to be connected to a managed IP-based LAN/WAN.

• RJ-45 for network connection
• 4 RJ-11 telephone connections
• 4 relays with Form C contacts
• Generates caller ID signals
• Front panel activity LED
• Network activity LEDs
• 4 REN
• 2.5mm jack for DC
• Power over Ethernet (PoE) 802.3af compliant
• Provides caller ID information
• No server required
• 1-to-11-digit dial plans
• Easy windows-based setup

12 Port 25 Volt/45ohm Talkback Gateway, VE1225S

The VE1225S 12 Port Talkback Gateway allows for the ultimate modernization of old-fashioned analog intercom systems. Each VE1225S provides 12 two-way intercom channels each supporting either 2 x 45 Ohm speakers or a 15-Watt load of 25 V speakers. The unit conveniently features 12 call button inputs as well as dual line level outputs. These line level outputs may be connected to amplifiers or self-amplified speakers in order to provide one-way audio to common areas. AC power makes installation as easy as plugging in a common AC receptacle. System relays may be utilized for visual signaling during announcements or for door unlock functionality. 12 port retrofit gateway channels may be directly accessed via Session Initiation Protocol (SIP).

  • Replaces most analog school intercoms
  • 12 port 25 V- or 45-Ohm speaker connection
  • 12 inputs for call switches
  • 2-line level outputs for direct connection to one-way audio systems
  • 2 Form A relay contacts
  • 120 – 240 V 50/60 Hz AC powered
  • Easy Windows based setup
  • No server required
  • 1-to-11-digit dial plans
  • Front panel status led
  • Compatible with most existing speaker cable
  • Scalable to thousands of intercom stations/zones
  • 19-inch rack mount design (1 unit)
  • Convenient screw terminal and amphenol connectors
  • Software volume control per zone
  • SIP compatible

SIP 20-Watt Gateway 25/70/100 V, InformaCast®, VIP-851-70/100-IC

Valcom’s VIP-851-70/100-IC, InformaCast® SIP 20-Watt Gateway 25/70/100 V enables voice access to a single zone of one-way paging over an IP network, allowing page zones to be extended anywhere network connectivity is available. The VIP-851-70/100-IC has output connections for line level and 25 V, 70 V or 100 V speakers.

  • 1 Audio Input
  • 3 Audio Outputs (VIP-851-25/70/110)
  • 1 Form C Relay
  • 1 SIP identity for registering to a VoIP telephone system
  • Power over Ethernet PoE+ 802.3at compatible
  • Front panel activity LED
  • Front panel PoE+ Fault indicator
  • Front panel Supervision Fault indicator
  • Provides 20 Watts of power for 25 V or 70 V or 100 V speakers
  • Provides line level audio for up to 40 Valcom one-way amplified speaker assemblies
  • Contact closure or VOX operation of audio input
  • Removable screw terminal connectors provided for audio and relay interfaces
  • AUX input music mutes during page
  • Barrel jack for optional DC power

SIP 20-Watt Gateway, 25 V, InformaCast®, VIP-851-25-IC

VIP-851-25-IC IP/SIP Paging Gateway

Valcom’s VIP-851-25-IC, InformaCast® SIP 20-Watt Gateway 25 V enables voice access to a single zone of one-way paging over an IP network, allowing page zones to be extended anywhere network connectivity is available. The VIP-851-25-IC can be programmed as a SIP (Session Initiation Protocol) device for connectivity to virtually any VoIP (Voice over IP) telephone system. The VIP-851-25-IC has output connections for line level and 25 V speakers only.

  • 1 Audio Input
  • 2 Audio Outputs (VIP-851-25)
  • 1 Form C Relay
  • 1 SIP identity for registering to a VoIP telephone system
  • Power over Ethernet PoE+ 802.3at compatible
  • Front panel activity LED
  • Front panel PoE+ Fault indicator
  • Front panel Supervision Fault indicator
  • Provides 20-Watts of power for 25 V speakers
  • Provides line level audio for up to 40 Valcom one-way amplified speaker assemblies
  • Contact closure or VOX operation of audio input
  • Removable screw terminal connectors provided for audio and relay interfaces
  • AUX input music mutes during page
  • Barrel jack for optional DC power

Universal Paging Interface with Licenses, V-9972-2

SIP or Analog based Paging Interface

The V-9972-2 Universal Paging Interface with Licenses provides access to virtually any paging system from a variety of phone system connections. Designed for quick and easy installation. With the extended License version, you get additional features, such as multiple SIP lines and enhanced Night Ring and enable full functionality with other Valcom IP Endpoints.

  • Use with Valcom multi-zone page units
  • Use with Valcom talkback page units
  • Background music mutes during page
  • Customizable pre-page alert tone
  • Music and tones volume controls
  • Feedback elimination
  • Multiple disconnect options
  • Security code option
  • SIP compatible, TLS/SRTP supported for SIP
  • Web interface
  • Requires a power supply; VP-624D
    not included, but recommended

RingCentral® Paging Adapter, VRCPA

VRCPA Paging Adapter

Valcom’s VRCPA RingCentral® Page Adapter is designed to provide access to paging systems from RingCentral hosted Session Initiation Protocol (SIP) voice over IP (VoIP) connections, or through analog trunk or station inputs (FXO/FXS). When paired with RingCentral SIP connections the VRCPA supports Valcom handsfree page units for talkback paging and up to 150 Valcom one-way amplified speakers. The VRCPA can connect multiple units for multi-zone paging.

  • The VRCPA can simply connect:
  • Any Legacy 25/70V system
  • Valcom analog one-way or talkback systems
  • Valcom IP speaker/horn endpoints
  • Self-amplified speakers/horns

IP Gateway FXO Port, Network — Dual Port, VIP-822A

VIP-822A Paging Gateway

The VIP-822A IP Paging Gateway FXO Port, Network — Dual Port allows most loop start station ports to be connected to a managed IP-based LAN/WAN. SIP connectivity allows the VIP-822A to act as a gateway device between a SIP telephone system and other Valcom paging systems.

  • RJ-45 for network connection
  • 2 RJ-11 FXO connections
  • 2 RJ-11 failover telephone connections
  • Decode Caller ID signals
  • Front panel activity LED
  • Network activity LEDs
  • 2.5mm jack for DC power
  • Power over Ethernet (PoE) 802.3af compatible