Accessories

  • In-Wall Audio Mixer Remote Module, V-9984-W

    Valcom's V-9984-W, In-Wall Audio Mixer Remote Module, is a cost-effective solution that eliminates the use of expensive in-wall amplifiers. The complete sound system is ideal for conference rooms, lecture halls, restaurants, auditoriums and gymnasiums.

    • Provides 1 balanced XLR microphone input & 1 auxiliary input for MP3 Players, CD, DVD or PC's
    • Connects to main control module, w/2 Pair 24 AWG Cable
    • Volume control for each input
    • Power “ON” indicator
    • Phantom power (Switch Controlled) with “ON” indicator allows use of consumer microphone

    Learn More
  • Loud Warbler Ringer Horn, V-9945A

    Valcom's V-9945A Loud Warble Ringer Horn is a two-tone horn designed to broadcast tones throughout your organization to notification individuals of shift changes, breaks or other important announcements. The V-9945A broadcasts a loud warble as long as an input signal is present and have the ability for night rings for after normal business hours. The V-9945A is a two-tone ringer horn that provides amplified electronic tones for signaling in large, noisy or outside areas.

    • Interrupted or uninterrupted contact closure activation
    • Built-in tone generator, speaker and volume control
    • Warble tone - night ring
    • Single tone - time clock/doorbell/alarm
    • Single tone overrides warble tone if activate simultaneously
    • Beige
    • Indoor/outdoor use

    Learn More
  • Message-On-Hold USB, V-9988

    Valcom's V-9988 Message-On-Hold USB device eliminates time limitations and provides an infinite opportunity for continuous background music or messages. The digital message on hold systems supports the MP3 playback without any special drivers or software.

    • Continuous playback of music and/or messages
    • Supports flash drives up to 4GB
    • High quality audio playback up to 128Kbps
    • Built-in monitor speaker
    • LED status indicator
    • USB flash drive include
    • Free generic on-hold message
    • Free personalized on-hold message
    • Pre-recorded audio file included

    Learn More
  • Metal Backbox, for Ceiling Speakers, S-551-5

    Clarity S-551-5 Ceiling Speaker Backbox

    S-551-5 Ceiling Speaker Backbox prevents debris and insulation from coming into contact with the speaker. The sturdy steel construction of this backbox allows it to be used in plenum return ceilings. In open ceiling structures, the backbox may be used as an enclosure for a speaker by attaching the backbox directly to the beam and mounting a speaker to the backbox with the hardware provided. Packaged 5 per box.

    • Sturdy steel construction with five knockouts
    • Fire retardant damping material
    • Used in plenum return ceilings

    Learn More
  • Microphone Adapter, V-9939C

    Valcom's V-9939C Microphone Adapter connects Valcom's dynamic microphones to our paging systems. The V-9939C works with most microphones with push-to-talk switches.

    • Provides contact closure
    • Built-in microphone preamplifier
    • Mounts at microphone location
    • Provides a set of form "C" contacts
    • May be connected to a selected zone of a multi-zone paging system
    • Connector terminals for all connections
    • 600 Ohms balanced and 50,000 Ohms inputs works with most microphones with push-to-talk switches

    Learn More
  • Mount Ring for 12-Inch Analog Clock, Wired, V-SMR12A

    Valcom's clock surface mount option makes it easy for retrofit applications.

    • Surface Mount Housing: The housings are intended for wired round analog clock retrofit applications where in-wall cabling is impractical.

    Learn More
  • Mount Ring for 12-Inch Analog Clock, Wireless, V-SMR12AW

    V-SMR12AW

    The housings are intended for wireless round analog clock retrofit applications.

    Learn More
  • Mounting Bridge for 4-Inch Ceiling Speaker, Metal, V-9904M-5

    The V-9904M-5 Mounting Bridge is designed for quick and easy installation and securely mounts 4-inch round ceiling speakers.

    • Coated to inhibit rust
    • Prevents ceiling tile sag
    • Sturdy metal design
    • Priced individually and sold in multiples of 5

    Learn More
  • Mounting Bridge for 8-Inch Ceiling Speaker, Metal, 5 Pack, S-550-5

    S-550-5 Ceiling Speaker Bridge provides a solid mounting structure for ceiling speakers, prevents ceiling tile sag and is galvanized to inhibit rusting. Packaged 5 per box.

    • Provides a solid mounting structure
    • Prevents ceiling tile sag
    • Coated to inhibit rust
    • Compatible with round or square baffles
    • Packaged 5 per box

    Learn More
  • Mounting Bridge for 8-Inch Ceiling Speaker, Metal, V-9914M-5

    The V-9914M-5 Mounting Bridge is designed for quick and easy installation and securely mounts 8-inch round ceiling speakers.

    • Coated to inhibit rust
    • Prevents ceiling tile sag
    • Sturdy metal design
    • Priced individually and sold in multiples of 5

    Learn More
  • Mounting Ring for 8-Inch Speakers, Post-Construction, Plastic, V-9912P-12

    The V-9912P-12 Mounting Ring is designed for quick and easy installation and securely mounts 8-inch round ceiling speakers in retro sheetrock ceilings.

    • Provides a solid mounting structure
    • Sturdy plastic design
    • Priced individually and sold in multiples of 12

    Learn More
  • Mounting Ring for 8-Inch Speakers, Pre-Construction, Metal, V-9912M-10

    The V-9912M-10 Mounting Ring is designed for quick and easy installation and securely mounts 8-inch round ceiling speakers in new sheetrock ceilings.

    • Provides a solid mounting structure
    • Sturdy metal design
    • Steel ring is galvanized to inhibit rust
    • Priced individually and sold in multiples of 10

    Learn More
  • Multi-Tone Generator, V-9927A

    Valcom's Multi-Tone Generator allow you to add distinctive tones or rings over your speakers. The Valcom Multi-Tone Generator gives you the ability to alert your employees of scheduled breaks and emergencies.

    • Automatic page/music override
    • Use Up to 8 different tones with a single unit
    • Choice of 2 sets of tones: Siren evacuation*, Whoop tornado*
    • USA Standard Immediate Evacuation Signals:
      • Warble fire*
      • Steady shift changes*
      • Burst alarm signal*
      • Chime doorbutton/code call
      • Dual chime doorbell ring

    Learn More
  • Noise Sensing Volume Control, V-9933A

    When Valcom's V-9933A Noise Sensing Volume Control is installed in your organization, the device electronically adjusts the level of your speakers to ensure pages are clear and intelligible. The V-9933A is ideal in any setting where ambient noise levels are constantly changing. When paired with the V-9934 Remote Microphone, your environments sound level is being constantly monitored.

    • Constantly monitors the area and automatically adjusts the volume on the paging speakers
    • Use one per zone and/or one per noise area

    Learn More
  • Normal Call-In Switch with Volume Control, used with IP Talkback Speakers, Stainless Steel, VE2973A

    The VE2973A Normal Call-In Switch is designed to be used with Valcom VoIP Talkback Speakers and Retrofit Gateways.

    • Fits a single-gang electrical box
    • No external power source required
    • Black call button for normal calls
    • Front accessible volume buttons
    • Easy installation
    • Indoor use

    Learn More
  • Normal Call-In Switch, used with IP Talkback Speakers, Stainless Steel, VE2975A

    The VE2975A Call Switch is designed for use with Valcom VoIP talkback speakers and retrofit gateways.

    • Fits a single-gang electrical box
    • No external power source required
    • Black call button for normal calls
    • Easy installation
    • Indoor use

    Learn More
  • Page Port Preamp/Expander without Bell Box, Wall Mounted, V-2994-W

    Valcom's V-2994-W Page Port Preamp/Expanders are a solid state audio amplifier that expands the number of Valcom amplified speakers on a zone. The V-2994-W drives up to 150 Valcom speakers so you can expand your network of Valcom speakers and horns and reach more people within your organization.

    • Expansion of up to 150 one-way speakers per unit
    • Pre-amplified low level audio to remote sites
    • Isolates Page Port from speaker lines
    • Power requirements: -24 Vdc, 45 mA

    Learn More
  • Page Port PreAmp/Expander, with Bell Box, Wall Mounted, Stainless-Steel, V-1094A

    Valcom's V-1094A Page Port Preamp/Expanders are a solid state audio amplifier that expands the number of Valcom amplified speakers on a zone. The V-1094A features a brushes stainless-steel plate with embossed numbers and bell box (single gang electrical wall box). The page port preamp/expander will interface 600-ohm type page ports to up to 150 Valcom amplified speakers or expand the number of Valcom amplified speakers on a zone by 150.

    • Brushed stainless-steel plate
    • Embossed numbers from 0 to 10
    • Surface or wall mounted options
    • Single gang surface mount bell box included
    • UL Listed

    Learn More
  • Page Port Preamp/Expander, without Bell Box, Wall Mounted, Stainless-Steel, V-1094B

    Valcom's V-1094B Page Port Preamp/Expander Without Bell Box is a solid state audio amplifier that expands the number of Valcom amplified speakers on a zone. The V-1094B features a brushed stainless-steel plate with embossed numbers, without a Bell Box (single gang electrical wall box). The page port preamp/expander will interface 600-ohm type page ports to up to 150 Valcom amplified speakers or expand the number of Valcom amplified speakers on a zone by 150.

    • Brushed stainless-steel plate
    • Embossed numbers from 0 to 10
    • Surface or wall mounted options
    • Single gang surface mount bell box not included
    • UL Listed

    Learn More
  • Recessed Backbox for Large Clock/Speakers, VB-R19

    VB-R19 Recessed Backbox

    Valcom backboxes are available in a variety of shapes and sizes to meet any installation style or design is designed to facilitate easy mounting of Valcom's large clock/speaker assembly. The recessed mount backbox is common for softer surfaces such as drywall.

    • Backbox for large clock/speaker assembly
    • Indoor use
    • Recess mount

    Learn More
  • Recessed Backbox for Small Clock/Speaker Combo's, VB-R22

    Valcom backboxes are available in a variety of shapes and sizes to meet any installation style or design. Backboxes are designed to facilitate easy mounting of Valcom's small clock/speakers. The recessed mount is common for softer surfaces such as drywall.

    • Backbox for small clock/speaker combo
    • Indoor use
    • Recessed mount

    Learn More
  • Recessed Backbox for Square FlexHorn™ Faceplate (Deep), VB-R17-D

    Valcom backboxes are available in a variety of shapes and sizes to meet any installation style or design. The recessed backbox is designed to facilitate easy mounting of Valcom's IP Square FlexHorn™ Faceplate. The recessed mount backbox is common for softer surfaces such as drywall.

    • Backbox for IP Square FlexHorn™ Faceplate
    • Recessed mount
    • Indoor use

    Learn More
  • Recessed Backbox for Square Speaker Faceplates, VB-R12

    Valcom backboxes are available in a variety of shapes and sizes to meet any installation style or design.

    • Backbox for Square Speaker Faceplates
    • Indoor use
    • Recessed mount

    Learn More
  • Recessed Mount Vandal-Resistant Enclosure and Stainless-Steel Faceplate, for FlexHorn™, V-9805

    The V-9805 provides protection for Valcom FlexHorns™ (V-1080/V-1090) in gymnasiums and other areas that are vulnerable to damage. FlexHorns™ is not included.

    • Optimal protection
    • Stainless-steel
    • Vandal-resistant
    • Indoor use

    Learn More
  • Recessed Mount Vandal-Resistant Stainless-Steel Faceplate, for FlexHorn™, V-9806

    The V-9806 Stainless Steel Faceplate provides protection for Valcom FlexHorns™ (V-1080/V-1090) in areas that are vulnerable to vandalism or damage.

    • Optimal protection
    • Stainless-steel
    • Vandal-resistant
    • Indoor use

    Learn More
  • Remote Input Module, V-9130-W

    The V-9130-W provides passive stereo to mono for line level audio sources and features both RCA and 3.5mm stereo headphone jack connections.

    • 3.5mm connection
    • Passive stereo to mono for line level audio sources
    • RCA connection

    Learn More
  • Remote Microphone, V-9934

    Valcom's V-9934 is a Remote Microphone designed to measure noise level changes in production plants. It works with the V-9933A Noise Sensing Volume Control to adjust page volume based on machine noise levels, ensuring comfortable announcements for everyone.

    • Self-contained microphone and pre-amp Phantom Powered - no power supply required
    • Screw terminals provided for all connections
    • Up to four units may be paralleled on one V-9933A

    Learn More
  • Remote Volume Control, SM-VC

    Clarity SM-VC Remote Volume Control

    The SM-VC Remote Volume Control allows adjusting the output level of the Clarity SM120 amplifier from a remote location.

    • Remotely controls output level of a Clarity SM120 Amplifier up to 1000ft away
    • Brushed stainless steel plate
    • Embossed markings from 0 to 10
    • Wall mountable

    Learn More
  • Screw Terminal Block, VM-150

    Screw Terminal Block, VM-150, for connecting heavy guage speaker wire to Amphenol terminated intercom circuit cards.

    Learn More
  • Square Grille Faceplate, Round Hole Pattern, V-936480

    The V-936480 Square Grille Faceplate, Round Hole Pattern mounts and protects an 8-inch speaker assembly of your choosing.

    • Securely mounts and protects 8-Inch speaker assemblies
    • Quick and easy installation

    Learn More