VIP-422A
IP Lay-In 2′ x 2′ Ceiling Speaker with Backbox, Talkback
Great sounding SIP talkback speaker for indoor areas.
• PoE (IEEE 802.3af)
• Paging, emergency alerts and tones
• Valcom, InformaCast® and Intrado Revolution® versions
• Talkback intercom
• High quality audio
• Quick and easy installation
Overview
The VIP-422A PoE SIP IP Lay-In 2′ x 2′ Ceiling Speaker is the perfect choice for high quality voice paging, two-way communication, and emergency alerts for indoor areas. Designed for quick and easy installation.
Specifications
SPEAKER ELEMENT
Cone diameter: 8-inch (20.32 cm)
Voice coil impedance: 45 Ohms
AUDIO OUTPUT
Rating: > 96 dB @ 4ft (1.22 m)
Signal/noise ratio: -70
The -10dBm line level out may be connected to up to 40 Valcom Self Amplified Speakers
FREQUENCY RESPONSE
80 Hz to 15 kHz
POWER REQUIREMENTS
Power over Ethernet (POE) 802.3af compatible
NETWORK
10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP
PROTOCOLS
IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)
AUDIO CODECS
G.711 u-law, others
ACCESS METHODS
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
SIP – enabled telephone system
ENVIRONMENT
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
HOUSING & FINISH
Steel housing with a white baked on acrylic enamel finish
DIMENSIONS & WEIGHT
Dimensions:
23.75in H x 23.75in W x 3.75in D
(60.33cm x 60.33cm x 9.53cm)
Weight: 5.50lbs (2.49kg)
Options
| Protocol | Part Number | European Version |
| Valcom | VIP-422A | VIP-422A-EC |
| InformaCast® | VIP-422A-IC | |
| Intrado Revolution® | VIP-422A-SA |
Custom Colors available, Add -CC after part number.
Resources
Installation Manuals
Marketing Sheet
Technical Specifications
Simple Diagram
