Door/Entry Intercoms
Valcom's door entry intercom system gives you the extra layer of security you need for your office, school, dormitory or government building. Valcom's door intercom system is ideal for controlled areas of your organization where you need to manage and control the flow of individuals.
Analog
Analog door entry intercom systems require dedicated proprietary cabling and are often referred to as “legacy”. Dedicated cabling must be homerun from the door station speaker located at the door back to the door entry intercom control unit. An analog system can be stand alone using a basic 2500 type phone for access or connected to a C.O. line port or FXO. Set-up is manual and any changes including speaker audio volumes, zones, etc. require physical and/or cable changes. Analog systems are often used for smaller buildings with 1-4 door stations.
Full IP / SIP
Full IP / SIP door entry intercom systems are modern, flexible, easy to install, and utilize new or existing network infrastructures. Each IP door station plugs into a PoE network switch. All communications and power is provided with this single PoE port which makes installation fast and simple. Set-up and programming is software controlled and managed. Making changes is simple and done with the click of a mouse including speaker volume levels, door zones, and entry access codes. Access can be stand alone 2500 type phones (Valcom IP FXS gateway required), IP Interactive Consoles, FXO, or SIP. A full IP system has no limits on door entry zones and doesn’t require a door intercom controller. This type door entry intercom system is used in all type applications including small buildings with a few doors, or large buildings / campuses with hundreds of doors.