VIP-811A
IP Gateway 1 FXS Port
- Concurrent SIP and Multicast
- PoE (IEEE 802.3 af)
- Windows based application for control and setup
- Ideal for remote areas where phones are required
- 1 RJ-11 telephone connections
- 2 Relays with Form C contacts
Overview
Valcom's IP Gateway 1 FXS Port enables telephones to engage in paging and phone-to-phone communications over an IP-based network.
Specifications
AUDIO INPUT
Audio input impedance: 600 Ohms
Input level: -10dBm nominal
AUDIO OUTPUT
Output impedance: 600 Ohms
Output level: - 10dBm nominal
POWER REQUIREMENTS
Via rear panel barrel connector:
Voltage: 24VDC
Current: 325mA
Via 802.3af PoE Ethernet Switch: Class 3
NETWORK
10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP
PROTOCOLS
IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)
AUDIO CODECS
G.711 u-law, others
ACCESS METHODS
PBX, FXO Port
POTS telephone set
AUXILIARY RELAYS
Two Form C Relays rated at 1A @ 24 Vdc
ENVIRONMENT
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
DIMENSIONS & WEIGHT
Dimensions:
1.38in H x 6.13in W x 5.25in D
(3.50cm x 15.60cm x 13.33cm)
Weight: 1.25lbs (0.57kg)
MOUNTING
The VIP-811A is designed for wall or table mounting.
Resources
Drawings
Installation Manuals
Marketing Sheet
Technical Specifications
Simple Diagram
