VIP-201A
PagePro IP, SIP-Based Paging Server — 1 Zone, One-Way Analog Paging, plus 8 Zones IP Paging
SIP-Based Paging Server for Analog or IP Paging.
• PoE (IEEE 802.3af)
• 1 analog page output
• 8 zones of IP paging
• Background music
• Feedback elimination
• Night ring tone
Overview
The VIP-201A is a PagePro IP, SIP-Based Paging Server that works with virtually all SIP based telephone systems and provides 1 zone of one-way analog paging. Designed for quick and easy installation.
Specifications
AUDIO INPUT
AUX input impedance: 8 to 600 Ohms
AUX input l: -10dBm nominal
AUDIO OUTPUT
Page output impedance: 50 Ohms
Page output level: - 10dBm nominal
Auxiliary output provides a signal output compatible with most amplifiers and should be used where a transformer-coupled output is desired.
POWER REQUIREMENTS
Via rear panel barrel connector:
Voltage: 24VDC
Current: 325mA
Via 802.3af PoE Ethernet Switch: Class 3
NETWORK
10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP
PROTOCOLS
IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)
AUDIO CODECS
G.711 u-law, others
ACCESS METHODS
Valcom Multicast Page Group
SIP – enabled telephone system
AUXILIARY RELAYS
Two Form C Relays Rated at 1A @ 24 Vdc
ENVIRONMENT
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
DIMENSIONS & WEIGHT
Dimensions:
1.75in H x 16.60in W x 5.40in D
(4.57cm x 42.16cm x 13.71cm)
Weight: 4.65lbs (2.10kg)
Resources
Installation Manuals
Marketing Sheet
Technical Specifications
Simple Diagram
