VIP-801A

IP Gateway 1 Audio Port

  • Audio outputs
  • Programmable Form A or C Relay Closures
  • Programmable contact closure inputs
  • RJ-45 jack for network connection
  • Front panel activity LED
  • Provides audio for up to 40 Valcom one-way amplified speaker assemblies
  • Output control contact closure provided during paging output
  • Compatible with 25 or 70 Volt amplifiers
  • Barrel jack for optional DC power

Overview

The VIP-801A is one of Valcom's Audio Port Gateways that enables voice access to a single zone of one-way paging over an IP-based network. This allows page zone extension anywhere on the network allowing the page zone to be extended anywhere network connectivity is available. It can also be programmed as a SIP device for connectivity to virtually any VoIP telephone system. 

Specifications

AUDIO INPUT

Audio input impedance: 600 Ohms
AUX input impedance: 8 to 600 Ohms
AUX input level: -10dBm nominal

SENSITIVITY

Voice switch sensitivity: -21dBm

AUDIO OUTPUT

Page output impedance: 50 Ohms
Page output level: - 10dBm nominal
Auxiliary output provides a signal output compatible with most amplifiers and should be used where a transformer-coupled output is desired.

POWER REQUIREMENTS

Via rear panel barrel connector:
Voltage: 24VDC
Current: 325mA
Via 802.3af PoE Ethernet Switch: Class 3

NETWORK

10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP

PROTOCOLS

IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)

AUDIO CODECS

G.711 u-law, others

ACCESS METHODS

Valcom M Cast Page Group
SIP – enabled telephone system

CAPACITY

Provides audio for up to 40 Valcom one-way amplified speaker assemblies

AUXILIARY RELAYS

Two Form C Relays rated at 1A @ 24 Vdc

ENVIRONMENT

Temperature: 0 to +40° C 
Humidity: 0 to 85% non-precipitating

DIMENSIONS & WEIGHT

Dimensions:
1.38in H x 6.13in W x 5.25in D
(3.50cm x 15.60cm x 13.33cm)
Weight: 1.25lbs (0.57kg)

MOUNTING

The VIP-801A is designed for wall or table mounting.

Options

Protocol Part Number
Valcom VIP-801A 
InformaCast® VIP-801A-IC
Intrado Revolution® VIP-801A-SA

Resources

Drawings

Valcom VIP-801 IP Audio Gateway Network Single Port Drawing

Download

Valcom VIP-801 IP Audio Gateway Network Single Port PDF Drawing

Download

Valcom Warranty

Download

Installation Manuals

Valcom VIP-801A Installation Manual

Download

Valcom VIP-801A-SA Revolution Installation Manual

Download

Valcom VIP-801A-IC InformaCast Compliant Installation Manual

Download

Marketing Sheet

Valcom Audio Gateways Marketing Sheet

Download

Technical Specifications

Valcom VIP-801A Technical Specifications

Download

Valcom Revolution VIP-801A-SA Technical Specifications

Download

Valcom InformaCast VIP-801A-IC Technical Specifications

Download

How To Buy

US Distributors

Target

Target

TeleDynamics

TeleDynamics

Communications Supply Corporation (CSC)

Communications Supply Corporation (CSC)

Jenne

Jenne

Scansource

Scansource

International Distributors

Nimans

Nimans

Synnex

Synnex

Syptel

Syptel

Simple Diagram

Diagram