VIP-480AL
IP One-Way FlexHorn™ with Long Line Extender
- Indoor & outdoor/weather-resistant
- Stainless steel hardware
- Flexible Mounting:
- Recessed - can be mounted into wall
- Surface - mount to wall or ceiling using the Adjustable mounting bracket (included)
- Surface - mount to steel "I" beams using a "C" clamp (included)
- RJ-45 for network connection
- LED status indicator
- Network activity LEDs
- Power over Ethernet (PoE) 802.3af compatible
Overview
Valcom's VIP-480L IP One-Way FlexHorn™ is a compact horn designed for areas with low ceilings, and low-to-moderate noise environments. The VIP-480L is water-proof, which provides protection for settings such as car washes, operating rooms and food processing plants. It is also an ideal solution for gymnasiums, prisons, subway and train stations, parking garages. It gives you the flexibility to be mounted in a variety of ways.
Specifications
SPEAKER ELEMENT
3.5-inch (8.9cm)
Voice coil .75dia (1.90cm), 45 Ohm
AUDIO OUTPUT
Rating: 108 dB @ 4ft (1.22m)
Signal/noise ratio: -70 dB
FREQUENCY RESPONSE
400 Hz - 10 kHz
DISPERSION
120° Horizontal 90° Vertical
POWER REQUIREMENTS
Power over Ethernet (POE) 802.3af compatible
NETWORK
10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP
PROTOCOLS
IETF SIP (RFC3261)
IETF IGMP version 2 or 3 (RFC2236, RFC3376)
IETF RTP (RFC1889)
IETF RTP Payload for DTMF (RFC2833)
AUDIO CODECS
G.711 u-law, others
ACCESS METHODS
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
SIP – enabled telephone system
ENVIRONMENT
Network interface:
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
Horn:
Suitable for indoor or outdoor installation
HOUSING & FINISH
The horn is constructed with ABS. Available in White (W), Gray (GY) Beige (BGE).
Bracket fabricated with 16 AWG CRS and finished with black weather-resistant E-Coat. All hardware is stainless steel.
DIMENSIONS & WEIGHT
Dimensions:
6.80in H x 8.30in W x 3.30in D
(17.27cm) x (21.08cm) x (8.38cm)
Weight: 2.10lbs (0.95kg)
Network Interface:
1.62in H x 5.63in W x 3.45in D
(4.11cm) x (14.30cm) x (8.73cm)
with brackets – 8.22in W (20.87cm)
Weight: 2.10lbs (0.95kg)
MOUNTING
The Network Interface is designed for wall or table mounting and must be within 100 meters of the network switch.
The FlexHorn may be mounted to walls using the supplied universal bracket; mounts to steel "I" beams using the supplied "C" clamp or flush mounted in a wall.
ACCESSORIES
V-9805 Vandal Resistant Mounting Box and Faceplate
V-9806 Faceplate
Options
| Protocol | Beige | Gray | White |
| Valcom | VIP-480-BG | VIP-480-GY | VIP-480-W |
| InformaCast® | VIP-480-BG-IC | VIP-480-GY-IC | VIP-480-W-IC |
| Sync-Apps | VIP-480-BG-SA | VIP-480-GY-SA | VIP-480-W-SA |
Resources
Drawings
Marketing Sheet
Installation Manuals
Technical Specifications
Simple Diagram
